ADP80XX Service Defaults in Windows 10

PMC-Sierra Storport Driver For SPC8x6G SAS/SATA controller by PMC-Sierra.

Default Settings

Startup type: Manual
Display name:ADP80XX
Service name:ADP80XX
Service type:kernel
Error control:normal
Group:SCSI Miniport
Registry key:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ADP80XX

Default Behavior

ADP80XX is a kernel device driver. In Windows 10 it is starting only if the user, an application or another service starts it. If ADP80XX fails to start, the failure details are being recorded into Event Log. Then Windows 10 will start up and notify the user that the ADP80XX service has failed to start due to the error.

Restore Default Startup Configuration of ADP80XX

1. Run the Command Prompt as an administrator.

2. Copy the command below, paste it into the command window and press ENTER:

sc config ADP80XX start= demand

3. Close the command window and restart the computer.

The ADP80XX service is using the ADP80XX.SYS file that is located in the C:\Windows\System32\drivers directory. If the file is removed or corrupted, read this article to restore its original version from Windows 10 installation media.