LSI_SAS3 Service Defaults in Windows 8

LSI SAS Gen3 Driver (StorPort) by LSI Corporation.

The LSI_SAS3 service does not exist in:

Default Settings

Startup type: Manual
Display name:LSI_SAS3
Service name:LSI_SAS3
Service type:kernel
Error control:normal
Group:SCSI Miniport
Path:%SystemRoot%\System32\drivers\lsi_sas3.sys
Registry key:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LSI_SAS3

Default Behavior

The LSI_SAS3 service is a kernel device driver. In Windows 8 it will not be started until the user starts it. If LSI_SAS3 fails to start, the error details are added to Windows 8 error log. When the operating system startup is complete, the user is being notified that the LSI_SAS3 service hasn't been started.

Restore Default Startup Configuration of LSI_SAS3

1. Run the Command Prompt as an administrator.

2. Copy the command below, paste it into the command window and press ENTER:

sc config LSI_SAS3 start= demand

3. Close the command window and restart the computer.

The LSI_SAS3 service is using the lsi_sas3.sys file that is located in the C:\Windows\System32\drivers directory. If the file is removed or corrupted, read this article to restore its original version from Windows 8 installation media.